|
HMC703LP4E Datasheet, PDF (9/58 Pages) Hittite Microwave Corporation – 8 GHZ FRACTIONAL SYNTHESIZER | |||
|
◁ |
v02.0813
HMC703LP4E
8 GHz fractional synthesizer
Table 2. Pin Descriptions
Pin Number
Function
Description
1
SCK
CMOS Input: Serial port clock
2
SDI
CMOS Input: Serial port data
3
DVDD
Power Supply for digital - Nominal 3.3 V MAX 25 mA, fPD dependent
4
VDDIO
Power Supply for Digital IO - 3.3 V, 8 mA MAX (only when driving LD_SDO)
5
LD_SDO
CMOS Output: General Purpose Output - Lock Detect, Serial Data Out, others, Selectable
6
TRIG
CMOS Input : External Trigger pin.
7
N/C
No Connect
8
VDDPS
Power Supply for RF Divider, Nominal 3.3 V 35 mA MAX
9
N/C
No Connect
10
VCOIP
Differential RF Inputs. Normally AC Coupled, 2 V DC bias generated internally. For Single Ended
operation, RFN must be AC coupled to the ground plane, typically 100 pF ceramic. DC Bias of 2.3 V is
11
VCOIN
generated internally
12
VDDHF
Power Supply for RF Buffer, Nominal 3.3 V, 6 mA MAX
13
VDDLS
Power Supply for PFD to CP Level Shifters, Nominal 5 V, 5 mA MAX, fPD dependent.
14
VDDCPA
Power Supply for charge pump, Nominal 5 V, 10 mA MAX
15
CP
Charge pump output
16
AVDD
Power supply for analog bias generation, Nominal 3.3 V, 2 mA MAX
External bypass decoupling for precision bias circuits, 1.920 V +/-2 mV
17
BIAS
NOTE: BIAS ref voltage cannot drive an external load. Must be measured with 10 G⦠meter such as
Agilent 34410A, normal 10 M⦠DVM will read erroneously.
18
RVDD
Power Supply for Reference path, Nominal 3.3 V. 15 mA MAX reference dependent
19
N/C
No Connect
20
XREFP
Reference Input. DC bias is generated internally. Normally AC coupled externally.
21
VDDPD
Power Supply for phase detector. Nominally 3.3 V. Decoupling for this supply is critical. 5 mA MAX, fPD
dependent
22
N/C
No Connect
23
CEN
CMOS Input: Hardware Chip Enable
24
SEN
CMOS Input: Serial port latch enable
6-9
FIrrliniecgofseohprntrsomspenoasftirisibtoihicngilrirtdeyafunpi,rstnaedairdstsiheesbesuyldmtihivmebaedtypmlbriAcyayanyAta9ioarlnoen7agsnluoo8dlDrgt-eofDr2vttoheiom5ceveri0cwisptesi-ssiluse3afsobeuc3r.neie4dtSliseep3vuroeescaderinf,diycâ¢tnoaeoptriabroftensoe9srn:a7tascnHou8cyrbuij-ipernt2aacftrtttie5ienttnoeg0atecnr-mhdiMg3aehnrn3teigstclsei7aorobwf3oflAieptwhn.faoaatHuelaotoxngvwntsoeDeotviecrâ¢evCeori,.ctheoNnesOoorr. prodFOPreohnarroetnpiOToerei:nncc7e,-h8,ln21inod-3leEeo2lgil9viayze-t4arWy7wb,a0yeaw0,ntâ¢Pwhd.OO.tDhor.dirBeptitovrliaxetocen9,e.l1iCcn0oeo6rhd,maeeNtlrwoms:rwwsAwofnoo.aadrlndo,agM,loMADge.0Acv2oic0m0e61s2,8-9I2n140c.6,
Trademarks and registered trademarks are the property of theirArespppecltiivceaowtinoerns. Support: pll@Ahpitptliitcea.ticoon mSupport: Phone: 1-800-ANALOG-D
|
▷ |