UG534 Datasheet, PDF(83/96 Page)

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

UG534 Datasheet, PDF (83/96 Pages) –

◁

Appendix D

ML605 Master UCF

The UCF template is provided for designs that target the ML605. Net names provided in

the constraints below correlate with net names on the ML605 schematic. On identifying the

appropriate pins, the net names below should be replaced with net names in the user RTL.

See the Constraints Guide for more information.

Users can refer to the UCF files generated by tools such as MIG (Memory Interface

Generator for memory interfaces) and BSB (Base System Builder) for more detailed

information concerning the I/O standards required for each particular interface. The FMC

connectors J63 and J64 are connected to 2.5V Vcco banks. Because each userâs FMC card

implements customer-specific circuitry, the FMC bank I/O standards must be uniquely

defined by each customer.

The latest version of the UCF can be found on the ML605 board documentation website at

http://www.xilinx.com/ml605.

NET "CLK_33MHZ_SYSACE"

NET "CPU_RESET"

NET "DDR3_A0"

NET "DDR3_A1"

NET "DDR3_A2"

NET "DDR3_A3"

NET "DDR3_A4"

NET "DDR3_A5"

NET "DDR3_A6"

NET "DDR3_A7"

NET "DDR3_A8"

NET "DDR3_A9"

NET "DDR3_A10"

NET "DDR3_A11"

NET "DDR3_A12"

NET "DDR3_A13"

NET "DDR3_A14"

NET "DDR3_A15"

NET "DDR3_BA0"

NET "DDR3_BA1"

NET "DDR3_BA2"

NET "DDR3_CAS_B"

NET "DDR3_CKE0"

NET "DDR3_CKE1"

NET "DDR3_CLK0_N"

NET "DDR3_CLK0_P"

NET "DDR3_CLK1_N"

NET "DDR3_CLK1_P"

NET "DDR3_D0"

NET "DDR3_D1"

NET "DDR3_D2"

NET "DDR3_D3"

NET "DDR3_D4"

LOC = "AE16"; ## 93 on U19

LOC = "H10"; ## 2 on SW10 pushbutton (active-High)

LOC = "L14";

LOC = "A16";

LOC = "B16";

LOC = "E16";

LOC = "D16";

LOC = "J17";

LOC = "A15";

LOC = "B15";

LOC = "G15";

LOC = "F15";

LOC = "M16";

LOC = "M15";

LOC = "H15";

LOC = "J15";

LOC = "D15";

LOC = "C15";

LOC = "K19";

LOC = "J19";

LOC = "L15";

LOC = "C17";

LOC = "M18";

LOC = "M17";

LOC = "H18";

LOC = "G18";

LOC = "L16";

LOC = "K16";

LOC = "J11";

LOC = "E13";

LOC = "F13";

LOC = "K11";

LOC = "L11";

## 98 on J1

## 97 on J1

## 96 on J1

## 95 on J1

## 92 on J1

## 91 on J1

## 90 on J1

## 86 on J1

## 89 on J1

## 85 on J1

## 107 on J1

## 84 on J1

## 83 on J1

## 119 on J1

## 80 on J1

## 78 on J1

## 109 on J1

## 108 on J1

## 79 on J1

## 115 on J1

## 73 on J1

## 74 on J1

## 103 on J1

## 101 on J1

## 104 on J1

## 102 on J1

## 5 on J1

## 7 on J1

## 15 on J1

## 17 on J1

## 4 on J1

ML605 Hardware User Guide

www.xilinx.com

UG534 (v1.8) October 2, 2012

▷