DS730 Datasheet, PDF (46/46 Pages) Xilinx, Inc – LogiCORE IP Video Direct

LogiCORE IP Video Direct Memory Access v1.1
Full System Hardware Evaluation License
To obtain a Full System Hardware Evaluation license:
1. Navigate to the product page for this core.
2. Click Evaluate.
3. Follow the instructions to install the required Xilinx ISE software and IP Service Packs.
Obtaining a Full License
To obtain a Full license key, you must purchase a license for the core. After doing so, click the “Access Core” link on
the Xilinx.com IP core product page for further instructions.
Installing Your License File
The Simulation Only Evaluation license key is provided with the ISE CORE Generator system and does not require
installation of an additional license file. For the Full System Hardware Evaluation license and the Full license, an
email will be sent to you containing instructions for installing your license file. Additional details about IP license
key installation can be found in the ISE Design Suite Installation, Licensing and Release Notes document.
Ordering Information
The Video Direct Memory Access v1.1 core is provided under the SignOnce IP Site License and can be generated
using the Xilinx CORE Generator system v12.3 or higher. The CORE Generator system is shipped with Xilinx ISE
Design Suite development software.
Please contact your local Xilinx sales representative for pricing and availability of additional Xilinx LogiCORE
modules and software. Information about additional Xilinx LogiCORE modules is available on the Xilinx IP Center.
Revision History
The following table shows the revision history for this document.
Date
09/16/09
04/19/10
09/21/10
Version
1.0
1.1
2.0
Description of Revisions
Initial Xilinx release.
Revised "Command Input Mode" to include “read” command; added Simulator
Support section.
Updated for 12.3 release.
Notice of Disclaimer
Xilinx is providing this product documentation, hereinafter “Information,” to you “AS IS” with no warranty of any kind, express
or implied. Xilinx makes no representation that the Information, or any particular implementation thereof, is free from any
claims of infringement. You are responsible for obtaining any rights you may require for any implementation based on the
Information. All specifications are subject to change without notice. XILINX EXPRESSLY DISCLAIMS ANY WARRANTY
WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE INFORMATION OR ANY IMPLEMENTATION BASED
THEREON, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR REPRESENTATIONS THAT THIS
IMPLEMENTATION IS FREE FROM CLAIMS OF INFRINGEMENT AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Except as stated herein, none of the Information may be
copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any form or by any means
including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of
Xilinx.
DS730 September 21, 2010
www.xilinx.com
46
Product Specification