TA1360AFG_05 Datasheet, PDF (17/110 Pages) Toshiba Semiconductor – YCbCr/YPbPr Signal and Sync Processor for Digital TV, Progressive Scan TV and Double Scan TV

TA1360AFG
Resister Name
Description
Preset Value
Black stretch start point 1:
BLACK STRETCH POINT
000: OFF 001: 25 IRE~ 111: 55 IRE
CENTER
APL VS BSP
Black stretch start point 2:
00: 0 IRE 11: 46 IRE up (at APL 100%)
0 IRE
B.L.C
Black level automatic correction: Up to 6.5 IRE. (Black stretch takes priority.)
OFF
0: OFF 1: ON
B.D.L.
Switches black detection level:
0: 3 IRE 1: 0 IRE
3 IRE
Black stretch area reinforcement:
BS-AREA
ON
0: ON 1: OFF
SRT-GAIN
SRT gain; Y transient improvement (LTI)
00000: min 11111: max
CENTER
White letters improvement amplitude;
WPL-LEVEL
min
000: min (21 IRE) ~ 110: max (102 IRE) 111: OFF
D-ABL POINT
Dynamic ABL detection voltage
00: min 11: max
CENTER
Dynamic ABL sensitivity
D-ABL GAIN
min
00: min 11: max
Blue stretch point; B-axis correction
BL STRETCH POINT
min
00: min (28 IRE) 11: max (60 IRE)
ABL POINT
ABL detection voltage
000: min 111: max
CENTER
ABL sensitivity
ABL GAIN
min
000: min 111: max
RGB-OUT MODE
RGB output mode; RGB output mode SW for test and adjustment
00: Normal 01: R only 10: G only 11: B only
Normal
DYNCγ GAIN
Dynamic Yγ gain vs dark area; dynamic γ-correction according to dark area.
00:min~
11: max (Maximum gain is +6dB included Static Yγ gain for dark area.)
CENTER
Black stretch characteristic swich
BS-CHAR1 = 0 and BS-CHAR2 = 0: OFF
BS-CHAR1/2
BS-CHAR1 = 0 and BS-CHAR2 = 1: min
OFF
BS-CHAR1 = 1 and BS-CHAR2 = 0: mid
BS-CHAR1 = 1 and BS-CHAR2 = 1: max
Static Yγ dark area gain; γ correction for dark area
STATICγ GAIN-1
000: OFF 001: min (−5dB) ~ 11: max (+2.4dB)
OFF
Note: When STATIC γ GAIN-1 is 000(OFF), set DYNC γ GAIN to min (00),
STATIC γ GAIN-2 to OFF (11), and DYNC γ AREA to min (000).
Static Yγ light area gain; γ correction for light area
STATICγ GAIN-2
00: max (−8.8dB)~ 11: OFF
max
When 00~10 is set, light area static Yγ and light dynamic Yγ according to light area
is operated.
OSD BRIGHT
OSD brightness:
00: 5 IRE 01: 0 IRE 10: −5 IRE 11: −10 IRE
−5 IRE
OSD contrast:
OSD-CONTRAST
min
00: min (−9.5dB) 11: max (0dB)
17
2005-08-18