TA1360AFG_05 Datasheet, PDF (103/110 Pages) Toshiba Semiconductor – YCbCr/YPbPr Signal and Sync Processor for Digital TV, Progressive Scan TV and Double Scan TV

TA1360AFG
Note Characteristics
Test Conditions
V03 Vertical black peak
detection pulse
1. Repeat the step 1 of Note #V01. Set SW70 to C, and SW68 to C.
2. Input signal F (shown in the figure below) to TP52.
3. Measure phase differences VBPP_0E and VBPP_0S according to #47 output waveform.
4. Set subaddress (03) data to 01H, 02H, 03H, 04H, 05H, and 06H. Measure phase differences
VBPP_1E, VBPP_1S, VBPP_2E, VBPP_2S, VBPP_3E, VBPP_3S, VBPP_4E, VBPP_4S, VBPP_5E,
VBPP_5S, VBPP_6E, and VBPP_6S as in the step 3 above.
Signal F (TP 52
waveform input)
#39
input waveform
#70 waveform
3H
262.5H to 1125H
VBPP_E
VBPP_S
V04 Vertical blanking stop 1. Repeat the step 1 of Note #V01.
phase
2. Input signal F (shown in the figure below) to TP52.
3. Set subaddress (03) data to 00H and F0H. Measure blanking stop phase VBLK_MIN and
VBLK_MAX according to #12 output waveform.
Signal F (TP 52
waveform input)
3H
#39
input waveform
1125H
VBLK
#12
input waveform
103
2005-08-18