TA1360AFG_05 Datasheet, PDF (11/110 Pages) Toshiba Semiconductor – YCbCr/YPbPr Signal and Sync Processor for Digital TV, Progressive Scan TV and Double Scan TV

Pin
No.
Pin Name
Function
Interface Circuit
75
Connects filter for detecting black
peak.
Voltage of this pin controls black
70 BPH FILTER
stretch gain.
70
200 Ω
Leaving Y open and setting the
test circuit SW 70 = C enable to
monitor H/V-BPP
(black-stretch-stop pulse) width.
65
75
Connects filter for detecting dark
area.
71
DARK AREA DET
FILTER
Voltage of this pin controls
71
dynamic γ circuit gain for dark
area.
5 kΩ
1 kΩ
72
NC
73
This pin is not used.
Connect to GND.
74 APL FILTER
Connects filter for correcting DC
restoration rate.
Leaving this pin open enables to
monitor Y signal after black
stretch and dynamic γ.
⎯
40 kΩ
74
1 kΩ
1 kΩ
V_CC pin for Y/C block.
75 Y/C V_CC
See “Maximum Ratings” about the
⎯
supply voltage.
This pin is not used.
76 NC
⎯
Connect to GND.
77 VSM OUT
Outputs Y signal for VSM that
passed through HPF circuit (first
differential circuit).
Output signals are muted
according to pins 1, 2, and 80.
See pin 57.
65
75
65
16
78 ABCL IN
Inputs ABL and ACL signals.
Sets gain and start point of ABL
and dynamic ABL signal
according to bus controlling.
30 kΩ 5 kΩ
78
10
TA1360AFG
Input Signal/Output Signal
DC
DC
⎯
⎯
⎯
⎯
⎯
DC
11
2005-08-18