SI5344H-42H Datasheet, PDF (40/56 Pages) Silicon Laboratories – HIGH-FREQUENCY,

Si5344H/42H
Location
0x0535[0]
0x0B48[0:4]
Customer Name
FORCE_HOLD
OOF_DIV_CLK_DIS
Table 17. Setting Overrides
Engineering Name
OLB_HO_FORCE
OOF_DIV_CLK_DIS
Type
No NVM
User
Target Dec Value Hex Value
N/A
1
0x1
OPN&EVB
0
0x00
Once you receive the updated design file, simply open it in CBPro. The device will begin operation after startup
with the values in the NVM file. The flowchart for this process is shown in Figure 24.
Start
End: Place
sample order
Do I need a
pre‐programmed device with
a feature or setting which is
unavailable in ClockBuilder
Pro?
No
Configure device
using CBPro
Generate
Custom OPN
in CBPro
Yes
Contact Silicon Labs
Technical Support
to submit & review
Yes
your
non‐standard
configuration
request & CBPro
project file
Receive
updated CBPro
project file
from
Silicon Labs
with “Settings
Override”
Load project file
into CBPro and test
Does the updated
CBPro Project file
match your
requirements?
Figure 24. Process for Requesting Non-Standard CBPro Features
40
Rev. 1.0