SDA9361 Datasheet, PDF (3/47 Pages) Siemens Semiconductor Group – DDC-PLUS-Deflection Controller

SDA 9361
Revision History:
Previous Version:
Page
Page
(in previous (in current
Version) Version)
33
35
35
37
35
37
Current Version: 1998-02-01
1997-04-07
Subjects (major changes since last revision)
Setup time of input HSYNC (CLEXT=1) changed from 6 ns to 4 ns
Nom. average and max. stand-by current specified
Specification of charge current pump of PLL pin LF is unnecessary
Data Classification
Maximum Ratings
Maximum ratings are absolute ratings; exceeding only one of these values may cause
irreversible damage to the integrated circuit.
Recommended Operating Conditions
Under this conditions the functions given in the circuit description are fulfilled. Nominal
conditions specify mean values expected over the production spread and are the
proposed values for interface and application. If not stated otherwise, nominal values will
apply at T_A=25°C and the nominal supply voltage.
Characteristics
The listed characteristics are ensured over the operating range of the integrated circuit.
Edition 1998-02-01
Published by Siemens AG, Semiconductor Group
Copyright © Siemens AG 1998. All rights reserved.
Terms of delivery and right to change design reserved.