SDA9361 Datasheet, PDF (20/47 Pages) Siemens Semiconductor Group – DDC-PLUS-Deflection Controller

SDA 9361
STE:
GBE:
SRSE:
SSE:
BSE:
Scan time enable
0: control items for vertical scan width 0 and width 1 are disabled
1: control items for vertical scan width 0 and width 1 are enabled
Guard band enable
0: control item for guard band is disabled
1: control item for guard band is enabled
Start reduced scan enable
0: control item for start reduced scan is disabled
1: control item for start reduced scan is enabled
Start scan enable
0: control item for start vertical scan is disabled
1: control item for start vertical scan is enabled
Blanking select enable
0: control items for blanking times are disabled
1: control items for blanking times are enabled
The Vertical Sync Control Byte includes the following bits:
X
X
SSC
NR
NI
NL2
NL1
NL0
SSC:
NR:
NI:
Sandcastle without VBL
0: output SCP with VBL component
1: output SCP without VBL component
Noise reduction
0: no noise reduction of the vertical sync
1: noise reduction of the vertical sync
Non interlace
0: interlace depends on source
1: no interlace
Semiconductor Group
20
1998-02-01