RX113_16 Datasheet, PDF (56/131 Pages) Renesas Technology Corp – 32 MHz, 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory

RX113 Group
5. Electrical Characteristics
Table 5.4 DC Characteristics (2)
Conditions: 1.8 V ≤ VCC = VCC_USB < 2.7 V, 1.8 V ≤ AVCC0 < 2.7 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol
Min.
Typ.
Max.
Unit
Test
Conditions
Schmitt trigger
Ports P16, P17, port PA6, port
V_IH
VCC × 0.8
—
input voltage
PB0 (5 V tolerant)
5.8
V
Ports P02, P04, P07,
ports P10 to P15,
ports P20 to P27,
ports P30 to P32, P35,
ports P50 to P56,
ports PA0 to PA5, PA7
ports PB1 to PB7,
ports PC0 to PC7,
ports PD0 to PD4,
ports PE0 to PE7,
ports PF6, PF7,
port PH7,
ports PJ0*¹, PJ2*¹, PJ3,
RES#
VCC × 0.8
—
VCC + 0.3
Input voltage
(except for
Schmitt trigger
input pins)
All pins
All pins
MD
XTAL (external clock input)
Ports P40 to P44, P46,
ports P90 to P92,
ports PJ6, PJ7
V_IL
–0.3
—
∆V_T
VCC × 0.01
—
V_IH
VCC × 0.9
—
VCC × 0.8
—
VCC × 0.2
—
VCC + 0.3
V
VCC + 0.3
AVCC0 × 0.7
—
AVCC0 + 0.3
MD
XTAL (external clock input)
V_IL
–0.3
–0.3
—
VCC × 0.1
—
VCC × 0.2
Ports P40 to P44, P46,
ports P90 to P92,
ports PJ6, PJ7
–0.3
—
AVCC0 × 0.3
Note 1. There are restrictions on AVCC0 and VCC depending on the usage conditions for the 12-bit D/A converter and I/O ports.
When using ports PJ0 and PJ2 multiplexed with DA0 and DA1 as general I/O ports, make sure that VCC ≤ AVCC0.
Table 5.5 DC Characteristics (3)
Conditions: 1.8 V ≤ VCC = VCC_USB ≤ 3.6 V, 1.8 V ≤ AVCC0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Input leakage
current
Three-state
leakage current
(off-state)
Item
RES#, MD, port P35,
port PH7
Ports for 5 V tolerant
Pins other than above
Symbol Min.
Typ.
Max. Unit Test Conditions
I_in
—
—
1.0
µA V_in = 0 V, VCC
I_TSI
—
—
1.0
µA V_in = 0 V, 5.8 V
—
—
1.0
V_in = 0 V, VCC
Input capacitance
All input pins
(except for port P16, port P35,
USB0_DM, USB0_DP)
Port P16, port P35, USB0_DM,
USB0_DP
C_in
—
—
15
pF V_in = 0 V
Frequency: 1 MHz
T_a = 25°C
—
—
30
Table 5.6 DC Characteristics (4)
Conditions: 1.8 V ≤ VCC = VCC_USB ≤ 3.6 V, 1.8 V ≤ AVCC0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol Min.
Typ.
Max. Unit Test Conditions
Input pull-up
resistor
All ports
(except for ports P35, PH7)
R_U
10
20
100
kΩ V_in = 0 V
R01DS0216EJ0110 Rev.1.10
Mar 31, 2016
Page 56 of 131