RX113_16 Datasheet, PDF (54/131 Pages) Renesas Technology Corp – 32 MHz, 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory

RX113 Group
5. Electrical Characteristics
Table 5.2 Recommended Operating Conditions
Item
Power supply voltages
USB power supply voltages
Analog power supply voltages
Symbol
VCC^{*1, *3}
VSS
VCC_USB
VSS_USB
AVCC0^{*1 to *3}
AVSS0
VREFH0
VREFL0
VREFH
VREFL
Conditions
Min.
Typ.
Max.
Unit
When USB not used
1.8
—
3.6
V
When USB used
3.0
—
3.6
—
0
—
—
VCC
—
V
—
0
—
1.8
—
3.6
V
—
0
—
1.8
—
AVCC0
—
0
—
1.8
—
AVCC0
—
0
—
Note 1. AVCC0 and VCC can be set individually within the operating range, but there are the following restrictions for the voltage
applied to the PJ0 and PJ2 pins, VCC, and AVCC0.
When 12-bit D/A converter used: Voltage applied to port J0 and J2 pins (D/A output voltage) ≤ VCC
When general ports selected: VCC ≤ AVCC0
Note 2. For details, refer to section 36.8.11, Voltage Range of Analog Power Supply Pins in the User’s Manual: Hardware.
Note 3. Sequence of Powering on AVCC0 and VCC
When powering on AVCC0 and VCC, power them on at the same time or VCC first.
R01DS0216EJ0110 Rev.1.10
Mar 31, 2016
Page 54 of 131