RX113_16 Datasheet, PDF (55/131 Pages) Renesas Technology Corp – 32 MHz, 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory

RX113 Group
5. Electrical Characteristics
5.2 DC Characteristics
Table 5.3 DC Characteristics (1)
Conditions: 2.7 V ≤ VCC = VCC_USB ≤ 3.6 V, 2.7 V ≤ AVCC0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol
Min.
Typ.
Max.
Unit
Test
Conditions
Schmitt trigger
RIIC input pin
V_IH
VCC × 0.7
—
input voltage
(except for SMBus, 5 V tolerant)
5.8
V
Ports P16, P17, port PA6, port
PB0 (5 V tolerant)
VCC × 0.8
—
5.8
Ports P02, P04, P07,
ports P10 to P15,
ports P20 to P27,
ports P30 to P32, P35,
ports P50 to P56,
ports PA0 to PA5, PA7,
ports PB1 to PB7,
ports PC0 to PC7,
ports PD0 to PD4,
ports PE0 to PE7,
ports PF6, PF7,
port PH7,
ports PJ0*¹, PJ2*¹, PJ3,
RES#
VCC × 0.8
—
VCC + 0.3
RIIC input pin (except for SMBus) V_IL
–0.3
Other than RIIC input pin
–0.3
—
VCC × 0.3
—
VCC × 0.2
RIIC input pin (except for SMBus) ∆V_T VCC × 0.05
—
—
Other than RIIC input pin
VCC × 0.1
—
—
Input voltage
(except for
Schmitt trigger
input pins)
MD
XTAL (external clock input)
Ports P40 to P44, P46,
ports P90 to P92,
ports PJ6, PJ7
V_IH
VCC × 0.9
—
VCC + 0.3
V
VCC × 0.8
—
VCC + 0.3
AVCC0 × 0.7
—
AVCC0 + 0.3
RIIC input pin (SMBus)
2.1
—
VCC + 0.3
MD
XTAL (external clock input)
V_IL
–0.3
–0.3
—
VCC × 0.1
—
VCC × 0.2
Ports P40 to P44, P46,
ports P90 to P92,
ports PJ6, PJ7
–0.3
—
AVCC0 × 0.3
RIIC input pin (SMBus)
–0.3
—
0.8
Note 1. There are restrictions on AVCC0 and VCC depending on the usage conditions for the 12-bit D/A converter and I/O ports.
When using ports PJ0 and PJ2 multiplexed with DA0 and DA1 as general I/O ports, make sure that VCC ≤ AVCC0.
R01DS0216EJ0110 Rev.1.10
Mar 31, 2016
Page 55 of 131