M16C62N Datasheet, PDF (199/213 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Mitsubishi microcomputers
M16C / 62N Group (80-pin)
Appendix Standard Serial I/O Mode 2 (Flash Memory Version) ^{SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER}
Page Read Command
This command reads the specified page (256 bytes) in the flash memory sequentially one byte at a
time. Execute the page read command as explained here following.
(1) Transfer the “FF16” command code with the 1st byte.
(2) Transfer addresses A8 to A15 and A16 to A23 with the 2nd and 3rd bytes respectively.
(3) From the 4th byte onward, data (D0–D7) for the page (256 bytes) specified with addresses A8 to
A23 will be output sequentially from the smallest address first.
RxD1
(M16C reception data)
TxD1
(M16C transmit data)
FF16
A8 to
A15
A16 to
A23
data0
data255
Figure 1.32.22. Timing for page read
Read Status Register Command
This command reads status information. When the “7016” command code is sent with the 1st byte, the
contents of the status register (SRD) specified with the 2nd byte and the contents of status register 1
(SRD1) specified with the 3rd byte are read.
RxD1
(M16C reception data)
TxD1
(M16C transmit data)
7016
SRD SRD1
output output
Figure 1.32.23. Timing for reading the status register
198