M16C62N Datasheet, PDF (152/213 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics
Mitsubishi microcomputers
M16C / 62N Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 1.20.2. Recommended operating conditions (referenced to VCC = 2.4V (Mask ROM version is 2.2V) to
3.6V at Topr = –20°C to 85^oC / – 40°C to 85^oC(Note 3) unless otherwise specified)
Symbol
Parameter
Vcc
AVcc
Vss
AVss
VIH
VIL
I OH (peak)
I OH (avg)
I OL (peak)
I OL (avg)
f (XIN)
Supply voltage
Analog supply voltage
Supply voltage
Analog supply voltage
HIGH input
voltage
P00 to P07, P20 to P27,
P30 to P37, P40 to P43, P50 to P57, P60 to P67,
P76, P77, P80 to P87,P90, P92 to P97, P100 to P107,
XIN, RESET, CNVSS (BYTE)
P70 , P71
LOW input
voltage
P00 to P07, P20 to P27, P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71,P76, P77,
P80 to P87, P90, P92 to P97, P100 to P107,
XIN, RESET, CNVSS (BYTE)
HIGH peak output ^{P00 to P07, P20 to P27,P30 to P37,}
current
P40 to P43, P50 to P57, P60 to P67, P76, P77,
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
HIGH average output P00 to P07, P20 to P27, P30 to P37,
current
P40 to P43, P50 to P57, P60 to P67, P76, P77,
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
LOW peak output
current
P00 to P07, P20 to P27,P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71, P76, P77
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
LOW average
output current
P00 to P07, P20 to P27,P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71, P76, P77
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
Mask ROM version
No wait ^{Flash memory version}
Vcc=3.0V to 3.6V
Vcc=2.4V to 3.0V
Main clock input
oscillation
frequency
(Note 5, Note 6)
Mask ROM version
Mask ROM version
with wait ^{Flash memory version}
Vcc=2.2V to 2.4V
Vcc=3.0V to 3.6V
Vcc=2.4V to 3.0V
Mask ROM version
Vcc=2.2V to 2.4V
f (XCIN) Subclock oscillation frequency
Note 1: The mean output current is the mean value within 100ms.
Standard
Min.
Typ.
2.4(Note 4) _3.3
Vcc
0
0
0.8Vcc
0.8Vcc
0
0
0
0
0
0
0
32.768
Max.
3.6
Vcc
4.2
0.2Vcc
–10.0
–5.0
10.0
5.0
16
15 X Vcc
- 29
17.5 X Vcc
- 35
16
11.25 X Vcc
- 17.75
11.25 X Vcc
- 17.75
50
Unit
V
V
V
V
V
V
V
mA
mA
mA
mA
MHz
MHz
MHz
MHz
MHz
MHz
kHz
Note 2: The total IOL (peak) for all ports must be 80mA max. The total IOH (peak) for all ports must be 80mA max.
Note 3: Specify a product of –40°C to 85°C to use it.
Note 4: 2.2V is minimum supply voltage of mask ROM version.
Note 5: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency (No wait)
Mask ROM version
Mask ROM and flash memory versions
16.0
15 X VCC –29MHZ
17.5 X VCC–35MHZ
7.0
Main clock input oscillation frequency (With wait)
Mask ROM version
Mask ROM and flash memory versions
16.0
11.25 X VCC –17.75MHZ
9.25
7.0
Flash memory version program/erase voltage and read
operation voltage characteristics
Flash programerase voltage
VCC=3.0V to 3.6V
Flash read operation voltage
VCC=2.4V to 3.6V
3.5
0.0
2.2 2.4
3.0
3.6
Supply voltage[V]
(BCLK: no division)
0.0
2.2 2.4
3.0
3.6
Supply voltage[V]
(BCLK: no division)
Note 5: Execute case without wait, program / erase of flash memory by VCC=3.0V to 3.6V and f(BCLK) ≤ 6.25 MHz.
Execute case with wait, program / erase of flash memory by VCC=3.0V to 3.6V and f(BCLK) ≤ 10.0 MHz.
151