N25Q512A13GF840E Datasheet, PDF (88/91 Pages) Micron Technology – Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q512A

512Mb, Multiple I/O Serial Flash Memory
Part Number Ordering Information
Part Number Ordering Information
Micron Serial NOR Flash devices are available in different configurations and densities.
Verify valid part numbers by using Micron’s part catalog search at micron.com. To com-
pare features and specifications by device type, visit micron.com/products. Contact the
factory for devices not found.
For more information on how to identify products and top-side marking by the process
identification letter, refer to technical note TN-12-24, "Serial Flash Memory Device
Marking for the M25P, M25PE, M25PX, and N25Q Product Families."
Table 42: Part Number Information
Part Number
Category
Device type
Density
Technology
Feature set
Operating voltage
Block structure
Package
(RoHS-compliant)
Temperature and
test flow
Security features
Shipping material
Category Details
N25Q = Serial NOR Flash memory, Multiple Input/Output (Single, Dual, Quad I/O), XIP
512 = 512Mb
A = 65nm
1 = Byte addressability; HOLD pin; Micron XIP
2 = Byte addressability; HOLD pin; Basic XIP
3 = Byte addressability; RST# pin; Micron XIP
4 = Byte addressability; RST# pin; Basic XIP
7 = Byte addressability; HOLD pin; Micron XIP
8 = Byte addressability; HOLD pin; Micron XIP; RESET pin
3 = V_CC = 2.7 to 3.6V
G = Uniform (64KB and 4KB) , easy transparent stack
F8 = V-PDFN-8/8mm x 6mm RP
SF = SOP2-16/300mils
12 = T-PBGA-24b05/6mm x 8mm
4 = IT: –40°C to 85°C; Device tested with standard test flow
A = Automotive temperature range, –40 to 125°C; Device tested with high reliability
certified test flow
H = IT: –40°C to 85°C; Device tested with high reliability certified test flow
0 = Default
E = Tray
F = Tape and reel
G = Tube
Notes
1
1
1
1
2
1
3
4
Notes:
1. Enter 4-byte address mode and exit 4-byte address mode supported.
2. 4-byte addressing mode is the default at power-up. Enter and exit 4-byte addressing
mode are not supported.
3. See the table below for additional information.
4. Additional secure options are available upon customer request.
PDF: 09005aef84752721
n25q_512mb_1ce_3V_65nm.pdf - Rev. O 05/13 EN
88
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.