N25Q512A13GF840E Datasheet, PDF (26/91 Pages) Micron Technology – Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q512A

512Mb, Multiple I/O Serial Flash Memory
Nonvolatile and Volatile Registers
Table 17: Flag Status Register Bit Definitions (Continued)
Note 1 applies to entire table
Bit Name
Settings
0 Addressing
0 = 3 bytes addressing
1 = 4 bytes addressing
Description
Status bit: Indicates whether 3-byte or 4-byte address
mode is enabled.
Notes
2
Notes:
1. Register bits are read by READ FLAG STATUS REGISTER command. All bits are volatile.
2. Status bits are reset automatically.
3. Error bits must be cleared through the CLEAR FLAG STATUS REGISTER command.
4. These error flags are "sticky." They must be cleared through the CLEAR STATUS REGIS-
TER command.
5. Program or erase controller bit = NOT (write in progress bit).
PDF: 09005aef84752721
n25q_512mb_1ce_3V_65nm.pdf - Rev. O 05/13 EN
26
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.