N25Q512A13GF840E Datasheet, PDF (32/91 Pages) Micron Technology – Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q512A

512Mb, Multiple I/O Serial Flash Memory
READ REGISTER and WRITE REGISTER Operations
Figure 9: READ REGISTER Command
Extended
0
C
DQ0
DQ1
Command
MSB
High-Z
Dual
0
C
DQ[1:0]
Command
MSB
7
8
LSB
D_OUT
MSB
3
4
LSB
D_OUT
MSB
9
D_OUT
5
D_OUT
10
D_OUT
6
D_OUT
11
12
D_OUT
D_OUT
7
LSB
D_OUT
D_OUT
13
14
D_OUT
D_OUT
15
LSB
D_OUT
D_OUT
Quad
C
0
1
2
3
DQ[3:0]
Command
MSB
LSB
D_OUT
MSB
LSB
D_OUT
D_OUT
Don’t Care
Notes: 1. Supports all READ REGISTER commands except READ LOCK REGISTER.
2. A READ NONVOLATILE CONFIGURATION REGISTER operation will output data starting
from the least significant byte.
READ NONVOLATILE CONFIGURATION REGISTER Command
To execute a READ NONVOLATILE CONFIGURATION REGISTER command, S# is driv-
en LOW. For extended SPI protocol, the command code is input on DQ0, and output on
DQ1. For dual SPI protocol, the command code is input on DQ[1:0], and output on
DQ[1:0]. For quad SPI protocol, the command code is input on DQ[3:0], and is output
on DQ[3:0]. The operation is terminated by driving S# HIGH at any time during data
output.
The nonvolatile configuration register can be read continuously. After all 16 bits of the
register have been read, a 0 is output. All reserved fields output a value of 1.
READ VOLATILE or ENHANCED VOLATILE CONFIGURATION REGISTER Command
To execute a READ VOLATILE CONFIGURATION REGISTER command or a READ EN-
HANCED VOLATILE CONFIGURATION REGISTER command, S# is driven LOW. For ex-
tended SPI protocol, the command code is input on DQ0, and output on DQ1. For dual
SPI protocol, the command code is input on DQ[1:0], and output on DQ[1:0]. For quad
SPI protocol, the command code is input on DQ[3:0], and is output on DQ[3:0]. The op-
eration is terminated by driving S# HIGH at any time during data output.
When the register is read continuously, the same byte is output repeatedly.
PDF: 09005aef84752721
n25q_512mb_1ce_3V_65nm.pdf - Rev. O 05/13 EN
32
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.