PIC32MX1XX Datasheet, PDF (310/320 Pages) Microchip Technology – 32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

PIC32MX1XX/2XX
Revision C (November 2011)
All major changes are referenced by their respective
section in Table A-2.
TABLE A-2: MAJOR SECTION UPDATES
Section Name
Update Description
“32-bit Microcontrollers (up to 128
KB Flash and 32 KB SRAM) with
Audio and Graphics Interfaces,
USB, and Advanced Analog”
4.0 “Memory Organization”
29.0 “Electrical Characteristics”
Revised the source/sink on I/O pins (see “Input/Output” on page 1).
Added the SPDIP package to the PIC32MX220F032B device in the
PIC32MX2XX USB Family Features (see Table 2).
Removed ANSB6 from the ANSELB register and added the ODCB6,
ODCB10, and ODCB11 bits in the PORTB Register Map (see Table 4-20).
Updated the minimum value for parameter OS50 in the PLL Clock Timing
Specifications (see Table 29-16).
Revision D (February 2012)
All occurrences of VUSB were changed to: VUSB3V3. In
addition, text and formatting changes were
incorporated throughout the document.
All other major changes are referenced by their
respective section in Table A-1.
TABLE A-3: MAJOR SECTION UPDATES
Section Name
Update Description
“32-bit Microcontrollers (up to 128
KB Flash and 32 KB SRAM) with
Audio and Graphics Interfaces,
USB, and Advanced Analog”
Corrected a part number error in all pin diagrams.
Updated the DMA Channels (Programmable/Dedicated) column in the
PIC32MX1XX General Purpose Family Features (see Table 1).
1.0 “Device Overview”
Added the TQFP and VTLA packages to the 44-pin column heading and
updated the pin numbers for the SCL1, SCL2, SDA1, and SDA2 pins in the
Pinout I/O Descriptions (see Table 1-1).
7.0 “Interrupt Controller”
Updated the Note that follows the features.
29.0 “Electrical Characteristics”
Updated the Interrupt Controller Block Diagram (see Figure 7-1).
Updated the Maximum values for parameters DC20-DC24, and the Minimum
value for parameter DC21 in the Operating Current (IDD) DC Characteristics
(see Table 29-5).
Updated all Minimum and Maximum values for the Idle Current (IIDLE) DC
Characteristics (see Table 29-6).
Updated the Maximum values for parameters DC40k, DC40l, DC40n, and
DC40m in the Power-down Current (IPD) DC Characteristics (see Table 29-7).
30.0 “DC and AC Device
Characteristics Graphs”
Changed the minimum clock period for SCKx from 40 ns to 50 ns in Note 3 of
the SPIx Master and Slave Mode Timing Requirements (see Table 29-26
through Table 29-29).
Updated the Typical IIDLE Current @ VDD = 3.3V graph (see Figure 30-5).
DS61168D-page 310
Preliminary
© 2011-2012 Microchip Technology Inc.