PIC32MX1XX Datasheet, PDF (262/320 Pages) Microchip Technology – 32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

PIC32MX1XX/2XX
FIGURE 29-8:
OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
OCx
(Output Compare
or PWM mode)
OC11
Note: Refer to Figure 29-1 for load conditions.
OC10
TABLE 29-24: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-temp
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
OC10 TCCF OCx Output Fall Time
—
—
—
ns See parameter DO32
OC11 TCCR OCx Output Rise Time
—
—
—
ns See parameter DO31
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
FIGURE 29-9:
OCx/PWM MODULE TIMING CHARACTERISTICS
OCFA/OCFB
OC20
OC15
OCx
Note: Refer to Figure 29-1 for load conditions.
OCx is tri-stated
TABLE 29-25: SIMPLE OCx/PWM MODE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-temp
Param
No.
Symbol
Characteristics⁽¹⁾
Min Typical⁽²⁾ Max
Units
Conditions
OC15
OC20
Note 1:
2:
TFD
Fault Input to PWM I/O Change
—
—
50
ns
—
TFLT
Fault Input Pulse Width
50
—
—
ns
—
These parameters are characterized, but not tested in manufacturing.
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
DS61168D-page 262
Preliminary
© 2011-2012 Microchip Technology Inc.