PIC32MX1XX Datasheet, PDF (283/320 Pages) Microchip Technology – 32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

PIC32MX1XX/2XX
TABLE 29-39: CTMU CURRENT SOURCE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions:2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+105°C for V-temp
Param
No.
Symbol
Characteristic
Min. Typ. Max. Units
Conditions
CTMU CURRENT SOURCE
CTMUI1 IOUT1
Base Range⁽¹⁾
CTMUI2 IOUT2
10x Range⁽¹⁾
CTMUI3 IOUT3
100x Range⁽¹⁾
CTMUI4 IOUT4
1000x Range⁽¹⁾
—
0.55
—
µA CTMUICON<9:8> = 01
—
5.5
—
µA CTMUICON<9:8> = 10
—
55
—
µA CTMUICON<9:8> = 11
—
550
—
µA CTMUICON<9:8> = 00
CTMUFV1 VF
Temperature Diode Forward — 0.598 —
Voltage^(1,2)
V TA = +25ºC,
CTMUICON<9:8> = 01
— 0.658 —
V TA = +25ºC,
CTMUICON<9:8> = 10
— 0.721 —
V TA = +25ºC,
CTMUICON<9:8> = 11
CTMUFV2 VFVR
Temperature Diode Rate of —
Change^(1,2)
—
-1.92
-1.74
— mV/ºC CTMUICON<9:8> = 01
— mV/ºC CTMUICON<9:8> = 10
—
-1.56
— mV/ºC CTMUICON<9:8> = 11
Note 1: Nominal value at center point of current trim range (CTMUICON<15:10> = 000000).
2: Parameters are characterized but not tested in manufacturing. Measurements taken with the following
conditions:
• VREF+ = AVDD = 3.3V
• ADC module configured for conversion speed of 500 ksps
• All PMD bits are cleared (PMDx = 0)
• Executing a while(1) statement
• Device operating from the FRC with no PLL
© 2011-2012 Microchip Technology Inc.
Preliminary
DS61168D-page 283