PIC32MX1XX Datasheet, PDF (249/320 Pages) Microchip Technology – 32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

PIC32MX1XX/2XX
TABLE 29-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-temp
Param.
No.
Typical⁽²⁾
Max.
Units
Conditions
Power-Down Current (IPD) (Note 1)
DC40k
10
16
μA
-40°C
DC40l
44
DC40n 168
70
μA
259
μA
+25°C
+85°C
Base Power-Down Current
DC40m 335
536
µA
+105ºC
Module Differential Current
DC41e
5
20
μA
3.6V
Watchdog Timer Current: ΔIWDT (Note 3)
DC42e
23
50
μA
3.6V
RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC (Note 3)
DC43d 1000
1100
μA
3.6V
ADC: ΔIADC (Notes 3,4)
Note 1:
2:
3:
4:
Base IPD is measured with all peripheral modules and clocks shut down (ON = 0, PMDx = 1), CPU clock is
disabled. All I/Os are configured as inputs and pulled low. WDT and FSCM are disabled.
Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
© 2011-2012 Microchip Technology Inc.
Preliminary
DS61168D-page 249