PIC32MX1XX Datasheet, PDF (248/320 Pages) Microchip Technology – 32-bit Microcontrollers (up to 128 KB Flash and 32 KB SRAM) with Audio and Graphics Interfaces, USB, and Advanced Analog

PIC32MX1XX/2XX
TABLE 29-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤TA ≤+85°C for Industrial
-40°C ≤TA ≤+105°C for V-temp
Parameter
No.
Typical⁽²⁾
Max.
Units
Conditions
Idle Current (IIDLE): Core Off, Clock on Base Current (Note 1)
DC30a
1
1.5
mA
4 MHz (Note 3)
DC31a
2
3
mA
10 MHz
DC32a
4
6
mA
20 MHz (Note 3)
DC33a
5.5
8
mA
30 MHz (Note 3)
DC34a
7.5
11
mA
40 MHz
DC37a
DC37b
100
—
µA
250
—
µA
-40°C
+25°C
3.3V
LPRC (31 kHz)
(Note 3)
DC37c
380
—
µA
+85°C
Note 1:
The test conditions for base IDLE current measurements are as follows: System clock is enabled and
PBCLK divisor = 1:1. CPU in Idle mode (CPU core Halted). All peripheral modules are disabled
(ON bit = 0), but the associated PMD bit is cleared. WDT and FSCM are disabled. All I/O pins are config-
ured as inputs and pulled to VSS. MCLR = VDD.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: This parameter is characterized, but not tested in manufacturing.
DS61168D-page 248
Preliminary
© 2011-2012 Microchip Technology Inc.