English
Language : 

PIC24FJ256GA110_10 Datasheet, PDF (286/330 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit, General Purpose Flash Microcontrollers with Peripheral Pin Select
PIC24FJ256GA110 FAMILY
TABLE 28-19: ADC MODULE SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol
Characteristic
Min.
Typ
Max. Units
Conditions
AD01 AVDD
Module VDD Supply
AD02 AVSS
Module VSS Supply
Device Supply
Greater of — Lesser of V
VDD – 0.3
VDD + 0.3
or 2.0
or 3.6
VSS – 0.3 — VSS + 0.3 V
AD05
AD06
AD07
VREFH
VREFL
VREF
AD08 IVREF
AD09 ZVREF
Reference Voltage High
Reference Voltage Low
Absolute Reference
Voltage
Reference Voltage Input
Current
Reference Input
Impedance
Reference Inputs
AVSS + 1.7 —
AVDD
V
AVSS
— AVDD – 1.7 V
AVSS – 0.3 — AVDD + 0.3 V
—
—
1.25
mA (Note 3)
—
10K
—
 (Note 4)
Analog Input
AD10 VINH-VINL Full-Scale Input Span
VREFL
—
VREFH
V (Note 2)
AD11 VIN
Absolute Input Voltage
AVSS – 0.3 — AVDD + 0.3 V
AD12 VINL
Absolute VINL Input
Voltage
AVSS – 0.3
AVDD/2
V
AD17 RIN
Recommended Impedance
—
of Analog Voltage Source
—
2.5K
 10-bit
ADC Accuracy
AD20b NR
Resolution
—
10
—
bits
AD21b INL
Integral Nonlinearity
—
±1
<±2
LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3V
AD22b DNL
Differential Nonlinearity
—
±0.5
<±1
LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3V
AD23b GERR
Gain Error
—
±1
±3
LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3V
AD24b EOFF
Offset Error
—
±1
±2
LSb VINL = AVSS = VREFL = 0V,
AVDD = VREFH = 3V
AD25b —
Monotonicity(1)
—
—
—
— Guaranteed
Note 1:
2:
3:
The ADC conversion result never decreases with an increase in the input voltage and has no missing codes.
Measurements taken with external VREF+ and VREF- are used as the ADC voltage reference.
External reference voltage applied to VREF+/- pins. IVREF is current during conversion at 3.3V, 25°C.
Parameter is for design guidance only and is not tested.
4: Impedance during sampling is at 3.3V, 25°C. Parameter is for design guidance only and is not tested.
DS39905E-page 286
 2010 Microchip Technology Inc.