PIC24FJ256GA110_10 Datasheet, PDF (275/330 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit, General Purpose Flash Microcontrollers with Peripheral Pin Select

PIC24FJ256GA110 FAMILY
TABLE 28-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Idle Current (IIDLE): Core Off, Clock On Base Current, PMD Bits are Set⁽²⁾
DC51
4.3
13.0
A
-40°C
DC51a
DC51b
4.5
13.0
A
10
32
A
+25°C
+85°C
2.0V⁽³⁾
DC51c
DC51d
40
115
A
44
77
A
+125°C
-40°C
LPRC (31 kHz)
DC51e
DC51f
44
77
A
70
132
A
+25°C
+85°C
3.3V⁽⁴⁾
DC51g
130
217
A
+125°C
Note 1:
2:
3:
4:
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
Base IIDLE current is measured with core off, clock on, all modules off and all of the Peripheral Module Disable
(PMD) bits are set.
On-chip voltage regulator disabled (ENVREG tied to VSS).
On-chip voltage regulator enabled (ENVREG tied to VDD).
 2010 Microchip Technology Inc.
DS39905E-page 275