PIC24FJ256GA110_10 Datasheet, PDF (197/330 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit, General Purpose Flash Microcontrollers with Peripheral Pin Select

PIC24FJ256GA110 FAMILY
REGISTER 17-1: UxMODE: UARTx MODE REGISTER (CONTINUED)
bit 4
bit 3
bit 2-1
bit 0
RXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
BRGH: High Baud Rate Enable bit
1 = High-Speed mode (baud clock generated from FCY/4)
0 = Standard mode (baud clock generated from FCY/16)
PDSEL<1:0>: Parity and Data Selection bits
11 = 9-bit data, no parity
10 = 8-bit data, odd parity
01 = 8-bit data, even parity
00 = 8-bit data, no parity
STSEL: Stop Bit Selection bit
1 = Two Stop bits
0 = One Stop bit
Note 1: If UARTEN = 1, the peripheral inputs and outputs must be configured to an available RPn pin. See
Section 10.4 “Peripheral Pin Select” for more information.
2: This feature is only available for the 16x BRG mode (BRGH = 0).
 2010 Microchip Technology Inc.
DS39905E-page 197