PIC24FJ256GA110_10 Datasheet, PDF (112/330 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit, General Purpose Flash Microcontrollers with Peripheral Pin Select

PIC24FJ256GA110 FAMILY
REGISTER 7-39: INTTREG: INTERRUPT CONTROL AND STATUS REGISTER
R-0
U-0
R/W-0
U-0
CPUIRQ
—
VHOLD
—
bit 15
R-0
ILR3
R-0
ILR2
R-0
ILR1
R-0
ILR0
bit 8
U-0
—
bit 7
R-0
VECNUM6
R-0
VECNUM5
R-0
VECNUM4
R-0
VECNUM3
R-0
VECNUM2
R-0
VECNUM1
R-0
VECNUM0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
bit 12
bit 11-8
bit 7
bit 6-0
CPUIRQ: Interrupt Request from Interrupt Controller CPU bit
1 = An interrupt request has occurred but has not yet been Acknowledged by the CPU; this happens
when the CPU priority is higher than the interrupt priority
0 = No interrupt request is unacknowledged
Unimplemented: Read as ‘0’
VHOLD: Vector Number Capture Configuration bit
1 = VECNUM bits contain the value of the highest priority pending interrupt
0 = VECNUM bits contain the value of the last Acknowledged interrupt (i.e., the last interrupt that has
occurred with higher priority than the CPU, even if other interrupts are pending)
Unimplemented: Read as ‘0’
ILR<3:0>: New CPU Interrupt Priority Level bits
1111 = CPU interrupt priority level is 15
•
•
•
0001 = CPU interrupt priority level is 1
0000 = CPU interrupt priority level is 0
Unimplemented: Read as ‘0’
VECNUM<6:0>: Pending Interrupt Vector ID bits (pending vector number is VECNUM + 8)
0111111 = Interrupt vector pending is number 135
•
•
•
0000001 = Interrupt vector pending is number 9
0000000 = Interrupt vector pending is number 8
DS39905E-page 112
 2010 Microchip Technology Inc.