IS61NSCS25672 Datasheet, PDF (12/32 Pages) Integrated Silicon Solution, Inc – RAM 256K x 72, 512K x 36 18Mb Synchronous SRAM

IS61NSCS25672
IS61NSCS51236
ISSI ^®
Output Driver Impedance Control
SigmaRAMs may be supplied with either selectable (high) impedance output drivers. The ZQ pin of SigmaRAMs supplied
with selectable impedance drivers, allows selection between ΣRAM nominal drive strength (ZQ low) for multi-drop bus
applications and low drive strength (ZQ floating or high) point-to-point applications. The impedance of the data and clock
output drivers in these devices can be controlled via the static input ZQ. When ZQ is tied "low", output driver impedance
is set to ~25 Ω. When ZQ is tied "high" or left unconnected, output driver impedeance is set to ~50Ω. See the DC Electrical
Characteristics section for further information. The SRAM requires 32K cycles of power-up time after VCC reaches its
operating range.
Output Driver Characteristics - TBD
12
Integrated Silicon Solution, Inc. — 1-800-379-4774
ADVANCE INFORMATION Rev. 00A
06/19/01