RF60 Datasheet, PDF (25/157 Pages) –

RF60 CRYSTAL-LESS SOC TRANSMITTER v1.0
7. Electrical Characteristics
Table 7.1. Recommended Operating Conditions
Parameter
Symbol
Test Condition
Min Typ Max Unit
Supply Voltage
Supply Voltage Slew Rate
Ambient Temperature
Digital Input Range
V_DD
1.8
—
3.6
V
Initial Battery Insertion*
20
—
650 mV/
us
T_A
–40
25
85
°C
Digital Input Signals
–0.3
—
V_DD + V
0.3
*Note: Recommend bypass capacitor = 1 µF; slew rate measured 1 V < V_DD ,< 1.7 V.
Table 7.2. Absolute Maximum Ratings^1,2
Parameter
Symbol
Value
Unit
Supply Voltage
Input Current³
Input Voltage⁴
Junction Temperature
Storage Temperature
V_DD
–0.5 to 3.9
V
I_IN
10
mA
V_IN
–0.3 to (V_DD + 0.3)
V
T_OP
–40 to 90
℃
T_STG
–55 to 125
℃
Notes:
1. Permanent device damage may occur if the absolute maximum ratings are exceeded. Functional
operation should be restricted to the conditions as specified in the operational sections of this data sheet.
Exposure beyond recommended operating conditions for extended periods may affect device reliability.
2. Handling and assembly of these devices should only be done at ESD-protected workstations.
3. All input pins besides V_DD.
4. For GPIO pins configured as inputs.
Tel: [phone]
Fax: [phone]
25
E-mail: [e-mail] http://www.hoperf.com