RF60 Datasheet, PDF (105/157 Pages) –

RF60 CRYSTAL-LESS SOC TRANSMITTER v1.0
SFR Definition 26.1. PCON
Bit
7
6
5
4
3
2
1
0
Name
GF[5:0]
STOP
IDLE
Type
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
SFR Address = 0x87
Bit Name
Function
7:2 GF[5:0] _{General Purpose Flags 5–0.}
These are general purpose flags for use under software control.
1
STOP _{Stop Mode Select.}
Setting this bit will place the CIP-51 in Stop mode. This bit will always be read as 0.
1: CPU goes into Stop mode (internal oscillator stopped).
0
IDLE _{Idle Mode Select.}
Setting this bit will place the CIP-51 in Idle mode. This bit will always be read as 0.
1: CPU goes into Idle mode. (Shuts off clock to CPU, but clock to Timers, Interrupts,
Serial Ports, and Analog Peripherals are still active.)
Tel: [phone]
Fax: [phone]
105
E-mail: [e-mail] http://www.hoperf.com