GS4911B Datasheet, PDF (109/113 Pages) Gennum Corporation – HD/SD/Graphics Clock and Timing Generator with GENLOCK

GS4911B/GS4910B Data Sheet
5. References & Relevant Standards
Table 5-1: References & Relevant Standards
AES11-1997
SMPTE 125M-1995
SMPTE 170M-1999
SMPTE 244M-1995
SMPTE 260M-1999
SMPTE 267M-1995
SMPTE 274M-1998
SMPTE 293M-1996
SMPTE 296M-1997
SMPTE 318M-1999
SMPTE 347M-2001
SMPTE RP 164-1996
SMPTE RP 168-1993
SMPTE RP 211-2000
ITU-R BT.601-5
ITU-R BT.709-4
ITU-R BT.1358
VESA Monitor Timing
Specifications
Synchronization of Digital Audio Equipment in Studio Operations
Component Video Signal 4:2:2 – Bit-Parallel Digital Interface
Composite Analog Video Signal – NTSC for Studio Applications
System M/NTSC Composite Video Signals – Bit-Parallel Digital
Interface
1125/60 High-Definition Production System – Digital Representation
and Bit-Parallel Interface
Bit-Parallel Digital Interface – Component Video Signal 4:2:2 16x9
Aspect Ratio
1920 x 1080 Scanning and Analog and Parallel Digital Interfaces for
Multiple Picture Rates
720 x 483 Active Line at 59.94-Hz Progressive Scan Production –
Digital Representation
1280 x 720 Scanning, Analog and Digital Representation an Analog
Interface
Synchronization of 59.94- or 50-Hz Related Video and Audio Systems
in Analog and Digital Areas – Reference Signals
540 Mb/s Serial Digital Interface – Source Image Format Mapping
Location of Vertical Interval Time Code
Definition of Vertical Interval Switching Point for Synchronous Video
Switching
Implementation of 24P, 25P and 30P Segmented Frames for 1920 x
1080 Production Format
Studio Encoding Parameters of Digital Television for Standard 4:3 and
Wide-screen 16:9 Aspect Ratios
Parameter Values for the HDTV Standards for Production and
International Program Exchange ITU-R BT.799.3 Interface for Digital
Component Video Signals in 525-line and 625-line Television Systems
Operating at the 4:4:4 Level of Recommendation ITU-R BT.601 (PART
A)
Studio Parameters of 625 and 525 Line Progressive Scan Television
Systems
VESA and industry Standards and Guidelines for Computer Display
Monitor Timing – Version 1.0, Revision 0.8 (Adoption Date: September
17, 1998)
36655 - 2 April 2006
109 of 113