|
MC68HC705C9A Datasheet, PDF (96/118 Pages) Motorola, Inc – Microcontrollers | |||
|
◁ |
Electrical Specifications
12.6 3.3-Vdc Electrical Characteristics
Characteristic(1)
Symbol
Min
Typ(2)
Max
Unit
Output voltage
ILoad = 10.0 µA
ILoad = â10.0 µA
Output high voltage
(ILoad = â0.2 mA) PA7âPA0, PB7âPB0, PC6âPC0,
TCMP, PD7, PD0
(ILoad = â0.4 mA) PD5âPD1
(ILoad = â1.5 mA) PC7
Output low voltage
(ILoad = 0.4mA) PA7âPA0, PB7âPB0, PC6âPC0,
PD7, PD5âPD0, TCMP
(ILoad = 6 mA) PC7
Input high voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
VOL
â
â
VOH
VDD â0.1
â
VOH
VDD â0.3
â
VDD â0.3
â
VDD â0.3
â
VOL
â
â
â
â
VIH
0.7 Ã VDD
â
0.1
V
â
â
V
â
â
0.3
V
0.3
VDD
V
Input low voltage
PA7âPA0, PB7âPB0, PC7âPC0, PD7,
PD5âPD0, TCAP, IRQ, RESET, OSC1
VIL
VSS
â
0.2 Ã VDD
V
Supply current (3.0â3.6 Vdc @ fOP = 1.0 MHz)
Run(3)
Wait(4)
Stop(5)
25°C
â40 to 85°C
â
1.0
1.6
mA
IDD
â
500
900
µA
â
1.0
8
µA
â
2.5
20
µA
I/O ports hi-Z leakage current
PA7âPA0, PB7âPB0 (without pullup)
PC7âPC0, PD7, PD5âPD0
IOZ
â
â
10
µA
Input current
RESET, IRQ, OSC1, TCAP, PD7, PD5âPD0
IIn
â
â
1
µA
Input pullup current(6)
PB7âPB0 (with pullup)
IIn
0.5
â
20
µA
Capacitance
Ports (as input or output)
RESET, IRQ, OSC1, TCAP, PD7, PD5, PD0
COut
CIn
â
â
â
â
12
pF
8
1. VDD = 3.3 Vdc ± 0.3 Vdc, VSS = 0 Vdc, TA = â40 to +85 °C, unless otherwise noted
2. Typical values reflect measurements taken on average processed devices at the midpoint of voltage range, 25 °C only.
3. Run (operating) IDD measured using external square wave clock source; all I/O pins configured as inputs, port B = VDD, all
other inputs VIL = 0.2 V, VIH = VDDâ0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2
4. Wait IDD measured using external square wave clock source; all I/O pins configured as inputs, port B = VDD, all other inputs
VIL = 0.2 V, VIH = VDD â0.2 V; no DC loads; less than 50 pF on all outputs; CL = 20 pF on OSC2. Wait IDD is affected linearly
by the OSC2 capacitance.
5. Stop IDD measured with OSC1 = 0.2 V; all I/O pins configured as inputs, port B = VDD, all other inputs VIL = 0.2 V,
VIH = VDDâ0.2 V.
6. Input pullup current measured with VIL = 0.2 V.
MC68HC05C9A Advance Information Data Sheet, Rev. 4.1
96
Freescale Semiconductor
|
▷ |