English
Language : 

MC68HC705C9A Datasheet, PDF (93/118 Pages) Motorola, Inc – Microcontrollers
Chapter 12
Electrical Specifications
12.1 Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be exposed without permanently damaging
it.
The MCU contains circuitry to protect the inputs against damage from high static voltages; however, do
not apply voltages higher than those shown in the table below. Keep VIn and VOut within the range
VSS ≤ (VIn or VOut) ≤ VDD. Connect unused inputs to the appropriate voltage level, either VSS or VDD.
Rating
Supply voltage
Input voltage
Normal operation
Bootloader mode (IRQ pin only)
Current drain per pin (Excluding VDD and VSS)
Storage temperature range
Symbol
VDD
VIn
I
TSTG
Value
Unit
–0.3 to +7.0
V
VSS –0.3 to VDD + 0.3
V
VSS –0.3 to 2 x VDD + 0.3
25
mA
–65 to +150
°C
NOTE
This device is not guaranteed to operate properly at the maximum ratings.
Refer to 12.5 5.0-Vdc Electrical Characteristics for guaranteed operating
conditions.
12.2 Operating Temperature
Characteristic
Operating temperature range
Symbol
TA
Value
Unit
–40 to +85
°C
12.3 Thermal Characteristics
Characteristic
Thermal resistance plastic dual in-line (PDIP)
Thermal resistance plastic leaded chip carrier (PLCC)
Thermal resistance quad flat pack (QFP)
Thermal resistance plastic shrink DIP (SDIP)
Symbol
θJA
θJA
θJA
θJA
Value
60
70
95
60
Unit
°C/W
°C/W
°C/W
°C/W
MC68HC05C9A Advance Information Data Sheet, Rev. 4.1
Freescale Semiconductor
93