MC3630 Datasheet, PDF (71/83 Pages) –

MC3630 3-Axis Accelerometer
Preliminary Datasheet
(0x24) Reset Register
This register can be used to reset the device. Anytime there is a reset to the device, a POR
event, or a power cycle the SPI 3-wire configuration will reset to 4-wire mode.
Addr
0x24
Name
7
6
RESET RELOAD RESET
5
RESV
Bit
4
3
RESV
RESV
2
RESV
1
RESV
0
POR Value R/W
RESV 00000000 RW
Bit
[5:0]
6
7
Name
Reserved
RESET
RELOAD
Description
Reserved
0: Normal operation (default)
1: Force a power-on-reset (POR) sequence.
OTP contents are reloaded into registers, AOFS contents
are decompressed, and any other registers are returned
to their default. This bit is self-clearing.
0: Normal operation (default)
1: Reloads the registers from OTP.
A RELOAD operation enables OTP core for reading,
performs a complete read of OTP into the register file, and
then disables the OTP. Use register 0x01 bit 5 to monitor
the OTP_BUSY bit. This bit must be cleared by software
Table 37. Reset Register Settings
mCube Proprietary
© 2016 mCube Inc. All rights Reserved
APS-048-0047v1.2
71 / 83