MC3630 Datasheet, PDF (63/83 Pages) –

MC3630 3-Axis Accelerometer
Preliminary Datasheet
5 INT_FIFO_FULL
FIFO full interrupt enable.
0: No interrupt is generated when the FIFO is empty or
completely filled of sample data (default).
1: Generate an interrupt when the FIFO is full. This interrupt is
paired with the FIFO_FULL flag in register 0x08. Note that this
interrupt is independent of the FIFO threshold level, and will
only activate when the FIFO sample count has reached a value
of 32.
6 INT_FIFO_THRESH FIFO threshold interrupt enable.
0: No interrupt is generated when the FIFO threshold level is
reached (default).
1: Generate an interrupt when the FIFO threshold level is
reached.
7 INT_SWAKE
This interrupt is valid only in SWAKE mode.
0: No interrupt generated when SNIFF activity is detected
(default).
1: Generate an interrupt when SNIFF activity is detected.
Table 29. Interrupt Control Register Settings
mCube Proprietary
© 2016 mCube Inc. All rights Reserved
APS-048-0047v1.2
63 / 83