MC3630 Datasheet, PDF (68/83 Pages) –

MC3630 3-Axis Accelerometer
Preliminary Datasheet
(0x20) Drive Motion X Register
This register controls the test mode which moves the sensor in the X axis direction and
initializes specific hardware bits.
NOTE: Software must always write 0 to bits [7:4] and 1.
NOTE: Software must always write 1 to bit 0.
Bit
Addr
Name
7
6
5
4
3
2
1
0x20
DMX
0
0
0
0
DNX
DPX
0
0
POR Value R/W
1
00000000 W
Bit
0
1
2
3
[7:4]
Name
Description
1
Reserved. Always write 1 to this bit
0
Reserved. Always write 0 to this bit.
DPX
0: Disabled (default)
1: Move the sensor in X Positive direction
DNX
0: Disabled (default)
1: Move the sensor in X Negative direction
0000
Reserved. Always write 0 to these bits.
Table 33. Drive Motion X Register Settings
mCube Proprietary
© 2016 mCube Inc. All rights Reserved
APS-048-0047v1.2
68 / 83