EPF10K30E Datasheet, PDF (98/100 Pages) Altera Corporation – Embedded Programmable Logic Device

FLEX 10KE Embedded Programmable Logic Devices Data Sheet
Additionally, the Altera software offers several features that help plan for
future device migration by preventing the use of conflicting I/O pins.
Table 81. I/O Counts for FLEX 10KA & FLEX 10KE Devices
FLEX 10KA
Device
I/O Count
EPF10K30AF256
191
EPF10K30AF484
246
EPF10K50VB356
274
EPF10K50VF484
291
EPF10K50VF484
291
EPF10K100AF484
369
FLEX 10KE
Device
I/O Count
EPF10K30EF256
176
EPF10K30EF484
220
EPF10K50SB356
220
EPF10K50EF484
254
EPF10K50SF484
254
EPF10K100EF484
338
Configuration Schemes
The configuration data for a FLEX 10KE device can be loaded with one of
five configuration schemes (see Table 82), chosen on the basis of the target
application. An EPC1, EPC2, or EPC16 configuration device, intelligent
controller, or the JTAG port can be used to control the configuration of a
FLEX 10KE device, allowing automatic configuration on system
power-up.
Multiple FLEX 10KE devices can be configured in any of the five
configuration schemes by connecting the configuration enable (nCE) and
configuration enable output (nCEO) pins on each device. Additional
FLEX 10K, FLEX 10KA, FLEX 10KE, and FLEX 6000 devices can be
configured in the same serial chain.
Table 82. Data Sources for FLEX 10KE Configuration
Configuration Scheme
Configuration device
Passive serial (PS)
Passive parallel asynchronous (PPA)
Passive parallel synchronous (PPS)
JTAG
Data Source
EPC1, EPC2, or EPC16 configuration device
BitBlaster, ByteBlasterMV, or MasterBlaster download cables,
or serial data source
Parallel data source
Parallel data source
BitBlaster or ByteBlasterMV download cables, or
microprocessor with a Jam STAPL file or JBC file
98
Altera Corporation