EPF10K30E Datasheet, PDF (4/100 Pages) Altera Corporation – Embedded Programmable Logic Device

FLEX 10KE Embedded Programmable Logic Devices Data Sheet
Table 4. FLEX 10KE Package Sizes
Device
144-
Pin
TQFP
208-Pin
PQFP
240-Pin 256-Pin 356- 484-Pin 599-Pin
PQFP FineLine Pin FineLine PGA
RQFP BGA BGA BGA
600- 672-Pin
Pin FineLine
BGA BGA
Pitch (mm)
0.50
0.50
0.50
Area (mm²)
484
936
1,197
Length × width 22 × 22 30.6 × 30.6 34.6 × 34.6
(mm × mm)
1.0
289
17 × 17
1.27
1,225
35 × 35
1.0
529
23 × 23
–
1.27
3,904 2,025
62.5 × 62.5 45 × 45
1.0
729
27 × 27
General
Description
Altera FLEX 10KE devices are enhanced versions of FLEX 10K devices.
Based on reconfigurable CMOS SRAM elements, the FLEX architecture
incorporates all features necessary to implement common gate array
megafunctions. With up to 200,000 typical gates, FLEX 10KE devices
provide the density, speed, and features to integrate entire systems,
including multiple 32-bit buses, into a single device.
The ability to reconfigure FLEX 10KE devices enables 100% testing prior
to shipment and allows the designer to focus on simulation and design
verification. FLEX 10KE reconfigurability eliminates inventory
management for gate array designs and generation of test vectors for fault
coverage.
Table 5 shows FLEX 10KE performance for some common designs. All
performance values were obtained with Synopsys DesignWare or LPM
functions. Special design techniques are not required to implement the
applications; the designer simply infers or instantiates a function in a
Verilog HDL, VHDL, Altera Hardware Description Language (AHDL), or
schematic design file.
4
Altera Corporation