DS620 Datasheet, PDF (10/30 Pages) Dallas Semiconductor – Low-Voltage, +-0.5°C Accuracy Digital Thermometer and Thermostat

LogiCORE IP XPS SYSMON ADC (v3.00.b)
Table 4: Core Registers (Cont’d)
Base Address + Offset
(hex)
Register Name
C_BASEADDR + 0x20C V_P/V_N
C_BASEADDR + 0x210 V_REFP
C_BASEADDR + 0x214 V_REFN
C_BASEADDR + 0x218 to
C_BASEADDR + 0x21C
Undefined
C_BASEADDR + 0x220 Supply Offset
C_BASEADDR + 0x224 ADC Offset
C_BASEADDR + 0x228 Gain Error
C_BASEADDR + 0x22C to
C_BASEADDR + 0x23C
Undefined
C_BASEADDR + 0x240
V_AUXP[0]/
V_AUXN[0]
C_BASEADDR + 0x244
V_AUXP[1]/
V_AUXN[1]
C_BASEADDR + 0x248
V_AUXP[2]/
V_AUXN[2]
C_BASEADDR + 0x24C
V_AUXP[3]/
V_AUXN[3]
C_BASEADDR + 0x250
V_AUXP[4]/
V_AUXN[4]
C_BASEADDR + 0x254
V_AUXP[5]/
V_AUXN[5]
C_BASEADDR + 0x258
V_AUXP[6]/
V_AUXN[6]
C_BASEADDR + 0x25C
V_AUXP[7]/
V_AUXN[7]
Access Type
Default
Value (hex)
Description
R/W⁽⁷⁾
When read: The 10-bit MSB justified result
of Analog-to-Digital (A/D) conversion on
the dedicated analog input channel
(Vp/Vn) is stored in this register
0x0
When written: Write to this register resets
the SYSMON hard macro. No specific data
is required. Applicable only when the
Virtex-6 device is targeted.
Read
The 10-bit MSB justified result of A/D
0x0
conversion on the reference input V_REFP is
stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the reference input V_REFN is
stored in this register.
N/A
Undefined
These locations are unused and contain
invalid data.
Read⁽⁶⁾
N/A
The calibration coefficient for the supply
sensor offset is stored in this register.
Read⁽⁶⁾
N/A
The calibration coefficient for the ADC
offset calibration is stored in this register.
Read⁽⁶⁾
N/A
The calibration coefficient for the gain error
is stored in this register.
N/A
Undefined
These locations are unused and contain
invalid data
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 0
is stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 1
is stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 2
is stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 3
is stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 4
is stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 5
is stored in this register
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 6
is stored in this register.
Read⁽⁶⁾
The 10-bit MSB justified result of A/D
0x0
conversion on the auxiliary analog input 7
is stored in this register.
DS620 October 19, 2011
www.xilinx.com
10
Product Specification