English
Language : 

W83627EHF Datasheet, PDF (76/141 Pages) Winbond – evolving product from Winbonds most popular I/O family
W83627EHF/EF, W83627EHG/EG
Bit 2: BEEP output control for AVCC if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 1: BEEP output control for VIN0 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 0: BEEP output control for CPUVCORE if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
6.8.50 BEEP Control Register 2 - Index 57h (Bank 0)
Register Location:
57h
Power on Default Value:
80h
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
EN_VIN1_BP
EN_VIN2_BP
EN_VIN3_BP
EN_AUXFANIN0_BP
EN_CASEOPEN_BP
EN_AUXTIN_BP
Reserved
EN_GBP
Bit 7: Global BEEP Control. Write 1, enable global BEEP output, which is default value. Write 0,
disable all BEEP output.
Bit 6: Reserved.
Bit 5: BEEP output control for temperature AUXTIN if the monitor value exceed the limit value. Write 1,
enable BEEP output. Write 0, disable BEEP output, which is default value.
Bit 4: BEEP output control for CASEOPEN if case has been opened. Write 1, enable BEEP output.
Write 0, disable BEEP output, which is default value.
Bit 3: BEEP output control for AUXFANIN0 if the monitor value exceed the limit value. Write 1, enable
BEEP output. Write 0, disable BEEP output, which is default value.
Bit 2: BEEP output control for VIN3 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 1: BEEP output control for VIN2 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
Bit 0: BEEP output control for VIN1 if the monitor value exceed the limit value. Write 1, enable BEEP
output. Write 0, disable BEEP output, which is default value.
6.8.51 Chip ID - Index 58h (Bank 0)
Register Location:
58h
Power on Default Value:
A1h
Attribute:
Read Only
Size:
8 bits
-70-