W83627EHF Datasheet, PDF (22/141 Pages) Winbond – evolving product from Winbonds most popular I/O family

W83627EHF/EF, W83627EHG/EG
Hardware Monitor Interface, continued
SYMBOL
PIN
I/O
CASEOPEN# 76
IN_t
VIN4
95
AIN
VIN3
96
AIN
VIN2
97
AIN
VIN1
98
AIN
VIN0
99
AIN
CPUVCORE 100 AIN
VREF
101 AOUT
AUXTIN
102 AIN
CPUTIN
103 AIN
SYSTIN
104 AIN
OVT#
HM_SMI#
OD₁₂
5
OD₁₂
VID5
VID4
VID3
VID2
VID1
VID0
105
106
107
108
I/O₁₂
109
110
AUXFANIN1
I/O_12ts
58
SI
INts
AUXFANIN0 111
CPUFANIN0 112 I/O_12ts
SYSFANIN 113
CPUFANIN1
I/O_12ts
119
MSI
IN_cs
FUNCTION
CASE OPEN detected. An active low level input from an
external device when case is opened. This signal can be
latched if pin VBAT is connect to battery, even
W83627EHF/EHG is power off. This pin is VSS for
W83627EF/EG.Pull down is recommended if useless.
(For H version only, C version is falling edge trigger only)
0V to 2.048V FSR Analog Inputs. (FSR: Full Scale Register)
0V to 2.048V FSR Analog Inputs.
0V to 2.048V FSR Analog Inputs.
0V to 2.048V FSR Analog Inputs.
0V to 2.048V FSR Analog Inputs.
0V to 2.048V FSR Analog Inputs.
Reference Voltage (2.048V) for temperature maturation.
Temperature sensor 3 inputs. It is used for temperature
maturation.
Temperature sensor 2 inputs. It is used for CPU temperature
maturation.
Temperature sensor 1 input. It is used for system temperature
maturation.
Over temperature Shutdown Output. It indicated the
temperature is over temperature limit.
System Management Interrupt channel output.
(Default after PCIRST)
VID input detect, also with output control.
0V to +3.3V amplitude fan tachometer input.
Receive data from Serial Flash. It is connected to SO of Serial
Flash.
0V to +3.3V amplitude fan tachometer input.
0V to +3.3V amplitude fan tachometer input. (Default)
MIDI serial data input.
-16-