LM3S2776 Datasheet, PDF (744/785 Pages) Texas Instruments – Stellaris® LM3S2776 Microcontroller

ROM DriverLib Functions
ROM_PWMGenIntStatus
// Gets interrupt status for the specified PWM generator block.
ROM_PWMGenIntTrigDisable
// Disables interrupts for the specified PWM generator block.
ROM_PWMGenIntTrigEnable
// Enables interrupts and triggers for the specified PWM generator block.
ROM_PWMGenPeriodGet
// Gets the period of a PWM generator block.
ROM_PWMGenPeriodSet
// Set the period of a PWM generator.
ROM_PWMIntDisable
// Disables generator and fault interrupts for a PWM module.
ROM_PWMIntEnable
// Enables generator and fault interrupts for a PWM module.
ROM_PWMIntStatus
// Gets the interrupt status for a PWM module.
ROM_PWMOutputFault
// Specifies the state of PWM outputs in response to a fault condition.
ROM_PWMOutputInvert
// Selects the inversion mode for PWM outputs.
ROM_PWMOutputState
// Enables or disables PWM outputs.
ROM_PWMPulseWidthGet
// Gets the pulse width of a PWM output.
ROM_PWMPulseWidthSet
// Sets the pulse width for the specified PWM output.
ROM_PWMSyncTimeBase
// Synchronizes the counters in one or multiple PWM generator blocks.
ROM_PWMSyncUpdate
// Synchronizes all pending updates.
ROM_SSIConfigSetExpClk
// Configures the synchronous serial interface.
ROM_SSIDataGet
// Gets a data element from the SSI receive FIFO.
ROM_SSIDataGetNonBlocking
// Gets a data element from the SSI receive FIFO.
744
November 17, 2011
Texas Instruments-Production Data