LM3S2776 Datasheet, PDF (26/785 Pages) Texas Instruments – Stellaris® LM3S2776 Microcontroller

Revision History
Revision History
The revision history table notes changes made between the indicated revisions of the LM3S2776
data sheet.
Table 1. Revision History
Date
November 2011
Revision Description
11107 ■ Added module-specific pin tables to each chapter in the new Signal Description sections.
■ In Hibernation chapter:
– Changed terminology from non-volatile memory to battery-backed memory.
– Clarified Hibernation module register reset conditions.
■ In Internal Memory chapter, corrected note in USER_DBG and USER_REG0/1/2/3 registers, that
once committed, the value of the register can never be restored to the factory default value.
■ In Timer chapter, clarified that in 16-Bit Input Edge Time Mode, the timer is capable of capturing
three types of events: rising edge, falling edge, or both.
■ In UART chapter, clarified interrupt behavior.
■ In SSI chapter, corrected SSIClk in the figure "Synchronous Serial Frame Format (Single Transfer)".
■ In Signal Tables chapter:
– Corrected pin numbers in table "Connections for Unused Signals" (other pin tables were correct).
– Corrected buffer type for PWMn signals in pin tables.
■ In Electrical Characteristics chapter:
– Corrected values in "Detailed Power Specifications" table.
– Corrected Nom values for parameters "TCK clock Low time" and "TCK clock High time" in "JTAG
Characteristics" table.
– Corrected missing values for "Conversion time" and "Conversion rate" parameters in "ADC
Characteristics" table.
■ Additional minor data sheet clarifications and corrections.
26
November 17, 2011
Texas Instruments-Production Data