LM3S2776 Datasheet, PDF (680/785 Pages) Texas Instruments – Stellaris® LM3S2776 Microcontroller

Pulse Width Modulator (PWM)
Bit/Field
17
16
Name
MINFLTPER
FLTSRC
Type
R/W
R/W
Reset
0
Description
Minimum Fault Period
This bit specifies that the PWM generator enables a one-shot counter
to provide a minimum fault condition period.
The timer begins counting on the rising edge of the fault condition to
extend the condition for a minimum duration of the count value. The
timer ignores the state of the fault condition while counting.
The minimum fault delay is in effect only when the MINFLTPER bit is
set. If a detected fault is in the process of being extended when the
MINFLTPER bit is cleared, the fault condition extension is aborted.
The delay time is specified by the PWMnMINFLTPER register MFP field
value. The effect of this is to pulse stretch the fault condition input.
The delay value is defined by the PWM clock period. Because the fault
input is not synchronized to the PWM clock, the period of the time is
PWMClock * (MFP value + 1) or PWMClock * (MFP value + 2).
The delay function makes sense only if the fault source is unlatched. A
latched fault source makes the fault condition appear asserted until
cleared by software and negates the utility of the extend feature. It
applies to all fault condition sources as specified in the FLTSRC field.
Value Description
0 Fault Condition Period Not Extended
The FAULT input deassertion is unaffected.
1 Fault Condition Period Extended
The PWMnMINFLTPER one-shot counter is active and extends
the period of the fault condition to a minimum period.
0
Fault Condition Source
This bit specifies the fault condition source.
Value Description
0 Fault0
The Fault condition is determined by the Fault0 input.
1 Register-Defined
The Fault condition is determined by the configuration of the
PWMnFLTSRC0 register.
680
November 17, 2011
Texas Instruments-Production Data