LM3S2776 Datasheet, PDF (739/785 Pages) Texas Instruments – Stellaris® LM3S2776 Microcontroller

Stellaris® LM3S2776 Microcontroller
B
B.1
ROM DriverLib Functions
DriverLib Functions Included in the Integrated ROM
The Stellaris^® Peripheral Driver Library (DriverLib) APIs that are available in the integrated ROM of
the Stellaris family of devices are listed below. The detailed description of each function is available
in the Stellaris® ROM User’s Guide.
ROM_ADCHardwareOversampleConfigure
// Configures the hardware oversampling factor of the ADC.
ROM_ADCIntClear
// Clears sample sequence interrupt source.
ROM_ADCIntDisable
// Disables a sample sequence interrupt.
ROM_ADCIntEnable
// Enables a sample sequence interrupt.
ROM_ADCIntStatus
// Gets the current interrupt status.
ROM_ADCProcessorTrigger
// Causes a processor trigger for a sample sequence.
ROM_ADCSequenceConfigure
// Configures the trigger source and priority of a sample sequence.
ROM_ADCSequenceDataGet
// Gets the captured data for a sample sequence.
ROM_ADCSequenceDisable
// Disables a sample sequence.
ROM_ADCSequenceEnable
// Enables a sample sequence.
ROM_ADCSequenceOverflow
// Determines if a sample sequence overflow occurred.
ROM_ADCSequenceOverflowClear
// Clears the overflow condition on a sample sequence.
ROM_ADCSequenceStepConfigure
// Configure a step of the sample sequencer.
ROM_ADCSequenceUnderflow
// Determines if a sample sequence underflow occurred.
ROM_ADCSequenceUnderflowClear
// Clears the underflow condition on a sample sequence.
November 17, 2011
739
Texas Instruments-Production Data