DS90UB924-Q1 Datasheet, PDF (48/62 Pages) Texas Instruments – 5-MHz to 96-MHz 24-bit Color FPD-Link III to OpenLDI Deserializer With Bidirectional Control Channel

DS90UB924-Q1
SNLS512 – APRIL 2016
www.ti.com
Register Maps (continued)
Table 8. Serial Control Bus Registers ^{(1) (2)} (continued)
ADD
(dec)
ADD
(hex)
Register Name
Bit
Register
Type
Default
(hex)
Function
Description
101 0x65 Pattern
7
0x00
Reserved
Generator
Configuration
6
RW
Checkerboa Scale Checkerboard Patterns:
rd Scale 0: Normal operation (each square is 1x1 pixel)
(default)
1: Scale checkered patterns (VCOM and
checkerboard) by 8 (each square is 8x8 pixels)
Setting this bit gives better visibility of the checkered
patterns.
5
RW
Custom
Use Custom Checkerboard Color
Checkerboa 0: Use white and black in the Checkerboard pattern
rd
(default)
1: Use the Custom Color and black in the
Checkerboard pattern
4
RW
PG 18–bit
Mode
18-bit Mode Select:
0: Enable 24-bit pattern generation. Scaled patterns
use 256 levels of brightness. (default)
1: Enable 18-bit color pattern generation. Scaled
patterns will have 64 levels of brightness and the R,
G, and B outputs use the six most significant color
bits.
3
RW
External
Clock
Select External Clock Source:
0: Selects the internal divided clock when using
internal timing (default)
1: Selects the external pixel clock when using internal
timing. This bit has no effect in external timing mode
(PATGEN_TSEL = 0).
2
RW
Timing
Select
Timing Select Control:
0: the Pattern Generator uses external video timing
from the pixel clock, Data Enable, Horizontal Sync,
and Vertical Sync signals. (default)
1: The Pattern Generator creates its own video timing
as configured in the Pattern Generator Total Frame
Size, Active Frame Size. Horizontal Sync Width,
Vertical Sync Width, Horizontal Back Porch, Vertical
Back Porch, and Sync Configuration registers.
1
RW
Color Invert Enable Inverted Color Patterns:
0: Do not invert the color output. (default)
1: Invert the color output.
0
RW
Auto Scroll
Auto Scroll Enable:
0: The Pattern Generator retains the current pattern.
(default)
1: The Pattern Generator will automatically move to
the next enabled pattern after the number of frames
specified in the Pattern Generator Frame Time
(PGFT) register.
See TI App Note AN-2198
102 0x66 PGIA
7:0
RW
0x00
PG Indirect
Address
This 8-bit field sets the indirect address for accesses
to indirectly-mapped registers. It must be written prior
to reading or writing the Pattern Generator Indirect
Data register.
See TI App Note AN-2198
103 0x67 PGID
7:0
RW
0x00
PG Indirect
Data
When writing to indirect registers, this register
contains the data to be written. When reading from
indirect registers, this register contains the read back
value.
See TI App Note AN-2198 AN-2198
48
Submit Documentation Feedback
Product Folder Links: DS90UB924-Q1
Copyright © 2016, Texas Instruments Incorporated