DS90UB924-Q1 Datasheet, PDF (47/62 Pages) Texas Instruments – 5-MHz to 96-MHz 24-bit Color FPD-Link III to OpenLDI Deserializer With Bidirectional Control Channel

www.ti.com
DS90UB924-Q1
SNLS512 – APRIL 2016
Register Maps (continued)
Table 8. Serial Control Bus Registers ^{(1) (2)} (continued)
ADD
(dec)
ADD
(hex)
Register Name
Bit
Register
Type
Default
(hex)
Function
Description
100 0x64 Pattern
Generator
Control
7:4
RW
0x10
Pattern
Generator
Select
Fixed Pattern Select
Selects the pattern to output when in Fixed Pattern
Mode. Scaled patterns are evenly distributed across
the horizontal or vertical active regions. This field is
ignored when Auto-Scrolling Mode is enabled.
xxxx: normal/inverted
0000: Checkerboard
0001: White/Black (default)
0010: Black/White
0011: Red/Cyan
0100: Green/Magenta
0101: Blue/Yellow
0110: Horizontal Black-White/White-Black
0111: Horizontal Black-Red/White-Cyan
1000: Horizontal Black-Green/White-Magenta
1001: Horizontal Black-Blue/White-Yellow
1010: Vertical Black-White/White— Black
1011: Vertically Scaled Black to Red/White to Cyan
1100: Vertical Black-Green/White-Magenta
1101: Vertical Black-Blue/White-Yellow
1110: Custom color (or its inversion) configured in
PGRS, PGGS, PGBS registers
1111: VCOM
See TI App Note AN-2198
3
Reserved
2
RW
Color Bars
Pattern
Enable Color Bars Pattern
0: Color Bars disabled (default)
1: Color Bars enabled
Overrides the selection from bits [7:4]
1
RW
VCOM
Pattern
Reverse
Reverse order of color bands in VCOM pattern
0: Color sequence from top left is (YCBR) (default)
1: Color sequence from top left is (RBCY)
0
RW
Pattern
Generator
Enable
Pattern Generator Enable
0: Disable Pattern Generator (default)
1: Enable Pattern Generator
See TI App Note AN-2198
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: DS90UB924-Q1
Submit Documentation Feedback
47