SM470R1B1M-HT Datasheet, PDF (38/67 Pages) Texas Instruments – 16/32-BIT RISC FLASH MICROCONTROLLER

SM470R1B1M-HT
SPNS155F – SEPTEMBER 2009 – REVISED AUGUST 2012
www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
Minimum and maximum parameters are characterized for operation at T_A = 220°C unless otherwise noted, but may not be
production tested at that temperature. Production test limits with statistical guardbands are used to ensure high temperature
performance. ⁽¹⁾
PARAMETER
TEST CONDITIONS
MIN
TYP ⁽²⁾
MAX UNIT
V_CC Digital supply current (operating mode)
I_CC
V_CC Digital supply current (standby mode)^{(8) (9)}
V_CC Digital supply current (halt mode)^{(8) (9)}
I_CCIO
V_CCIO Digital supply current (operating mode)
V_CCIO Digital supply current (standby mode)⁽⁹⁾
V_CCIO Digital supply current (halt mode)⁽⁹⁾
V_CCAD supply current (operating mode)
I_CCAD V_CCAD supply current (standby mode)
V_CCAD supply current (halt mode)
SYSCLK = 48 MHz,
ICLK = 24 MHz, V_CC = 2.05 V
SYSCLK = 60 MHz,
ICLK = 30 MHz, V_CC = 2.05 V
OSCIN = 5 MHz, V_CC = 2.05 V
All frequencies, V_CC = 2.05 V
No DC load, V_CCIO = 3.6 V⁽¹⁰⁾
No DC load, V_CCIO = 3.6 V⁽¹⁰⁾
No DC load, V_CCIO = 3.6 V⁽¹⁰⁾
All frequencies, V_CCAD = 3.6 V
All frequencies, V_CCAD = 3.6 V
All frequencies, V_CCAD = 3.6 V
SYSCLK = 48 MHz, V_CCP = 3.6 V
read operation
110
mA
125
mA
1.30
mA
700
µA
20
mA
250
µA
225
µA
15
mA
10
µA
10
µA
45
mA
SYSCLK = 60 MHz, V_CCP = 3.6 V
read operation
55
mA
I_CCP V_CCP pump supply current
V_CCP = 3.6 V program and erase
V_CCP = 3.6 V standby mode
operation ⁽⁸⁾
70
mA
10
µA
V_CCP = 3.6 V halt mode
operation ⁽⁸⁾
10
µA
C_I Input capacitance
C_O Output capacitance
2
pF
3
pF
(8) For flash banks/pumps in sleep mode.
(9) For reduced power consumption in low power mode, CANSRX and CANSTX should be driven output LOW.
(10) I/O pins configured as inputs or outputs with no load. All pulldown inputs ≤ 0.2 V. All pullup inputs ≥ V_CCIO – 0.2 V.
38
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated