LM3S1601 Datasheet, PDF (340/587 Pages) Texas Instruments – ARM and Thumb are registered trademarks and Cortex is a trademark

General-Purpose Timers
Bit/Field
1
0
Name
TASTALL
TAEN
Type
R/W
R/W
Reset
0
0
Description
GPTM Timer A Stall Enable
The TASTALL values are defined as follows:
Value Description
0 Timer A continues counting while the processor is halted by the
debugger.
1 Timer A freezes counting while the processor is halted by the
debugger.
If the processor is executing normally, the TASTALL bit is ignored.
GPTM TimerA Enable
The TAEN values are defined as follows:
Value Description
0 TimerA is disabled.
1 TimerA is enabled and begins counting or the capture logic is
enabled based on the GPTMCFG register.
340
June 19, 2012
Texas Instruments-Production Data