OMAP4460 Datasheet, PDF (129/444 Pages) Texas Instruments – Multimedia Device

Public Version
www.ti.com
3.3 DC Electrical Characteristics
Table 3-4 through Table 3-20 summarize the dc electrical characteristics.
NOTE
The data specified in Table 3-4 through Table 3-20 are subject to change.
OMAP4460
SWPS046A – JANUARY 2012
NOTE
The interfaces or signals described in Table 3-4 through Table 3-20 correspond to the
interfaces or signals available in multiplexing mode 0.
All interfaces or signals multiplexed on the balls / pins described in these tables have the
same dc electrical characteristics, unless multiplexing involves a PHY/GPIO combination in
which case different dc electrical characteristics are specified for the different multiplexing
modes.
NOTE
In the following tables, V_OL and V_OH are JEDEC (JESD8-7A) compliant that means:
Normal range of V_OH / V_OL are [VDDS – 0.45V] / 0.45 V respectively, for I_OH / I_OL = 2 mA
Wide range is V_OH / V_OL = [VDDS – 0.2 V] / 0.2 V respectively, for I_OH / I_OL = 100 µA
Except for the following signals:
• hdmi_ddc_scl, hdmi_ddc_sda, 2c[1:4]_scl, i2c[1:4]_sda, sr_scl, sr_sda in I²C mode
(Balls: A8 / B8 / AE28 / AE26 / C26 / D26 / W27 / Y27 / AG21 / AH22 / AG9 / AF9)
• dsi1_dy[0:4], dsi1_dy[0:4], dsi1_dy[0:2], dsi1_dy[0:2]
(Balls: P3 / P4 / N3 / N4 / M3 / M4 / L3 / L4 / K3 / K4 / T3 / T4 / U3 / U4 / V3 / V4)
• hdmi_data[0:2]x, hdmi_data[0:2]y, hdmi_clockx, hdmi_clocky
(Balls: C8 / D8 / C9 / D9 / C10 / D10 / C11 / D11)
• usba0_otg_dp, usba0_otg_dm (Balls: B5 / B4) in USB PHY mode
• fref_xtal_out (Ball: AH5)
• kpd_col[7-0]
(Balls: C20 / AH19 / B21 / AF20 / A21 / AE21 / B20 / H26 / H27 / B19 / G25 / J27 / D19 /
G26 / H25 / C19 / H26 / H27 / D18 / G25 / J27 / C18 / G26 / H25)
• hdq_sio (Ball: AA29)
• sys_nreswarm (Ball: AF7)
• usbc1_icusb_dm, usbc1_icusb_dp (Balls: H3 / AF5, H2 / AE5)
3.3.1 GPMC DC Electrical Characteristics
Table 3-4 summarizes the GPMC dc electrical characteristics in multiplexing mode 0.
NOTE
For more information on the IO cell configurations (SC[1:0], MB[1:0] and LB0), see the
Control Module / Control Module Functional Description / Functional Register Description /
Signal Integrity Parameter Control Registers With Pad Group Assignment section of the
OMAP4460 TRM.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): OMAP4460
Electrical Characteristics 129