THS8200 Datasheet, PDF (74/97 Pages) Texas Instruments – ALL FORMAT OVERSAMPLED COMPONENT VIDEO/PC GRAPHICS D/A SYSTEM WITH THREE 11-BIT DACS,CGMS DATA INSERTION

csm_mult_bcb_on:
B/Cb scaling on/off
{csm_rcr_bcb_cntl 0x4F(6)} [0]
0 : Scaling for B/Cb channel of
1 : Scaling for B/Cb channel on
csm_shift_rcr_on:
R/Cr shifting on/off
{csm_rcr_bcb_cntl 0x4F(5)} [0]
0 : Shifting for R/Cr channel off
1 : Shifting for R/Cr channel on
csm_shift_bcb_on:
B/Cb shifting on/off
{csm_rcr_bcb_cntl 0x4F(4)} [0]
0 : Shifting for B/Cb channel off
1 : Shifting for B/Cb channel on
csm_rcr_high_clip_on: R/Cr high-end clipping on/off
{csm_rcr_bcb_cntl 0x4F(3)} [0]
0 : R/Cr data clipping at high end off
1 : R/Cr data clipping at high end on
csm_rcr_low_clip_on: R/Cr low-end clipping on/off
{csm_rcr_bcb_cntl 0x4F(2)} [0]
0 : R/Cr data clipping at low end off
1 : R/Cr data clipping at low end on
csm_bcb_high_clip_on: B/Cb high-end clipping on/off
{csm_rcr_bcb_cntl 0x4F(1)} [0]
0 : B/Cb data clipping at high end off
1 : B/Cb data clipping at high end on
csm_bcb_low_clip_on: B/Cb low-end clipping on/off
{csm_rcr_bcb_cntl 0x4F(0)} [0]
0 : B/Cb data clipping at low end off
1 : B/Cb data clipping at low end on
5.1.8 Display Timing Generator Control, Part 2 (Sub-Addresses 0x50–0x82)
dtg2_bp<n>(10:0):
breakpoint<n> line number
{see register map table} [000 0000 0000]
DTG outputs line type dtg2_linetype<n> until line number of dtg2_bp<n+1> is reached. (n = 1..16)
dtg2_linetype<n>(3:0): Line type for dtg2_bp<n>
{see register map table} [0000]
The DTG outputs a line format corresponding to the table below until the next breakpoint line number is reached.
(n = 1..16)
5–17